UCaaS Cordless Base

Excel

Top of Form

Description

Reset W60 Phone:

Labels are:

1. Phone synced to base station
2. Base station is on the network
3. Power button

To register a new handset manually:

When the handset LCD screen prompts “Press base page 2s then press Reg.”, long press on the base station till the registration LED flashes.

Easy Registration:

1. Press the Reg soft key on the handset to register quickly.

Normal Registration:

1. Press the OK soft key on the handset, and then select Register Handset.
2. Select the desired base and then press the OK soft key. The handset begins searching the base.
3. Press the OK soft key after searching a base successfully.
4. Enter the base PIN (default: 0000), and then press the Done soft key to complete registration. After the success of registration, the handset LCD screen prompts “Handset Subscribed” and “Base NO. (The last 4 characters of connected Base’s MAC address)”. After initializing data successfully, an icon with internal handset number and handset name appears on the LCD screen.

Phone will sync to the base station if the light is red or clear, then it has lost it configuration. If the light turns green the phone is synced to the base station. And should be able to make calls.

If this does not happen, hold down the WIFI Signal until the green light starts to flash it will look for the phone and should sync. Make a test call after phone states “Registered”

All 3 lights should be green for the phone to work.

The easiest way to fix this (If) This is feasible are these steps:

1. On the phone main screen (Hit OK)
2. Tap on the Statis Icon
3. Select (Base)
4. Phone will give an IP address 192.168.254.111 (That is an example)
5. Put the IP in a web browser

This screen will appear:

1. Type Username and Password

Username: admin

1. Password: 5f36f1bd

It will take you to the main screen in the GUI

1. Click on the Account on the left-hand side click on Number Assignment

Bottom of Form